NTS Ultrasonics
NTS Ultrasonics Pty Ltd

Ultrasonic Instrumentation for NDT

NTS Ultrasonics supplies ultrasonic instrumentation for NDT (Non-destructive Testing) and measurement. Our software controlled ultrasonic systems for NDT are suitable for system integrators and OEMs developing their own computer controlled ultrasonic systems. We also supply ultrasonic preamplifier and remote pulser/preamplifier circuits for NDT applications involving long cable runs. See our remote pulser/preamplifier page.



Customized Ultrasonic Instrumentation



We usually supply circuits unhoused for system integrators to build into their own equipment, but circuits built into cases can be supplied on request. Also, as discussed in more detail on our software controlled ultrasonic systems page, we can modifiy the performance of our instrumentation and add functionality by reconfiguring the on-board field programmable gate array (FPGA).

On special request we can supply FPGA design files to allow clients to customize the boards themselves.

For our USB and SPI ultrasonic systems we supply drivers and demonstration software to allow the end user to verify the operation of the system, and as a starting point for their own software development. We can also write dedicated software specifically for client applications. Our software is written in C using National Instruments LabWindows CVI.
ultrasonic rail flaw detection
ultrasonic TOFD systems
ROV and diver operated subsea systems
ultrasonic tyre inspection
general ultrasonic flaw detection
robotic ultrasonic thickness measurement systems
sonar arrays
ultrasonic measurement (e.g. velocity, size, number)
smart sensor development
ultrasonic C scan systems
medium range ultrasonic guided wave systems
corrosion mapping systems
ultrasonic instrumentation for ndt: C scan
Image showing bond quality of Tungsten Carbide tiles silver braized to a steel backing. Generated with a C scan system using the UT-2X circuit.
Home || Ultrasonic NDT || Probe Assemblies || High Power Ultrasonics || Consulting and Design || About
Home || Ultrasonic NDT || Probe Assemblies || High Power Ultrasonics || Consulting and Design || About
NTS Ultrasonics Pty Ltd, Perth, Western Australia,  Tel: +61 8 9367 1578, Email: ntsu@ntsu.net.au
Home || Ultrasonic NDT || Probe Assemblies || High Power Ultrasonics || Consulting and Design || About
Home || Ultrasonic NDT || Probe Assemblies || High Power Ultrasonics || Consulting and Design || About
NTS Ultrasonics supplies ultrasonic instrumentation for NDT (non-destructive testing) and measurement. Our software controlled ultrasonic systems are suitable for system integrators and OEMs developing their own computer controlled ultrasonic systems. We also supply ultrasonic preamplifier and remote pulser/preamplifier circuits for NDT and condition monitoring applications involving long cable runs.
Location: Perth, Western Australia
e: ntsu@ntsu.net.au   ph: +61 8 9367 1578
Ultrasonic Instrumentation
NTS Ultrasonics Pty Ltd
Sitemap
~ Software Controlled Ultrasonic Systems
~ Remote Pulser Preamps
We can supply ultrasonic instrumentation that can be externally controlled by software from a computer, a microcontroller, or a DSP, using USB2.0 or SPI communications. See our software controlled ultrasonic systems page. Our SPI controlled ultrasonic pulser receivers are particularly suitable for subsea and robotic applications as well as microcontroller based smart sensor systems. Typically, our ultrasonic instrumentation for NDT is customized to meet specific customer requirements.

Our ultrasonic instrumentation has found application in: